R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

242
Ste
p
Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Configure preferences for
EBGP, IBGP, and local BGP
routes.
preference { external-preference
internal-preference
local-preference | route-policy
route-policy-name }
The default preferences for EBGP,
IBGP, and local BGP routes are
255, 255, and 130.
4. Configure an EBGP route as a
shortcut route.
network ip-address [ mask |
mask-length ] short-cut
By default, an EBGP route has a
preference of 255.
To configure preferences for BGP routes (IPv6 unicast/multicast address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
g. address-family ipv6
multicast
N/A