R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

245
Step Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Configure the default MED
value.
default med med-value The default MED value is 0.
To configure the default MED value (IPv6 unicast/multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
g. address-family ipv6
multicast
N/A
3. Configure the default MED
value.
default med med-value The default MED value is 0.
Enabling MED comparison for routes from different ASs
This task enables BGP to compare the MEDs of routes from different ASs.
To enable MED comparison for routes from different ASs (IPv4 unicast/multicast address family):