R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

251
Ste
p
Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Specify the router as the next
hop for routes sent to a peer or
peer group.
peer { group-name | ip-address }
next-hop-local
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
However, it does not set itself as
the next hop for routes sent to an
IBGP peer or peer group.
To configure the NEXT_HOP attribute (IPv6 unicast/multicast address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, or BGP IPv6
multicast address family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
c. bgp as-number
d. address-family ipv6
multicast
N/A
3. Specify the router as the next
hop for routes sent to a peer or
peer group.
peer { group-name |
ipv6-address } next-hop-local
By default, the router sets itself as
the next hop for routes sent to an
EBGP peer or peer group.
However, it does not set itself as
the next hop for routes sent to an
IBGP peer or peer group.