R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

257
Ste
p
Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Configure BGP to remove
private AS numbers from the
AS_PATH attribute of updates
sent to an EBGP peer or peer
group.
peer { group-name | ip-address }
public-as-only
By default, this feature is not
configured.
This command is only applicable to
EBGP peers or peer groups.
To remove private AS numbers from updates sent to an EBGP peer or peer group (IPv6 unicast/multicast
address family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
g. address-family ipv6
multicast
N/A