R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

264
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
Use either method.
3. Enable MD5 authentication for
a BGP peer group or peer.
peer { group-name | ip-address }
password { cipher | simple }
password
By default, MD5 authentication is
disabled.
To enable MD5 authentication for BGP peers (IPv6 unicast/multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
Use either method.
3. Enable MD5 authentication for
a BGP peer group or peer.
peer { group-name |
ipv6-address } password { cipher |
simple } password
By default, MD5 authentication is
disabled.
Configuring BGP load balancing
Perform this task to specify the maximum number of BGP ECMP routes for load balancing.
To specify the maximum number of BGP ECMP routes for load balancing (IPv4 unicast/multicast address
family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A