R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

265
Ste
p
Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Specify the maximum number
of BGP ECMP routes for load
balancing.
balance [ ebgp | eibgp | ibgp ]
number
By default, load balancing is
disabled.
To specify the maximum number of BGP ECMP routes for load balancing (IPv6 unicast/multicast address
family):
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, BGP-VPN IPv6
unicast address family view, or
BGP IPv6 multicast address
family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP-VPN IPv6 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
f. bgp as-number
g. address-family ipv6
multicast
N/A
3. Specify the maximum number
of BGP ECMP routes for load
balancing.
balance [ ebgp | eibgp | ibgp ]
number
By default, load balancing is
disabled.