R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

274
Step Command Remarks
2. Enter BGP IPv4 unicast address
family view, BGP-VPN IPv4
unicast address family view, or
BGP IPv4 multicast address
family view.
• Enter BGP IPv4 unicast address
family view:
a. bgp as-number
b. address-family ipv4
[ unicast ]
• Enter BGP-VPN IPv4 unicast
address family view:
c. bgp as-number
d. ip vpn-instance
vpn-instance-name
e. address-family ipv4
[ unicast ]
• Enter BGP IPv4 multicast
address family view:
f. bgp as-number
g. address-family ipv4
multicast
N/A
3. Advertise the COMMUNITY or
extended community attribute
to a peer or peer group.
• Advertise the COMMUNITY
attribute to a peer or peer
group:
peer { group-name |
ip-address }
advertise-community
• Advertise the extended
community attribute to a peer
or peer group:
peer { group-name |
ip-address }
advertise-ext-community
By default, the COMMUNITY or
extended community attribute is
not advertised.
4. (Optional.) Apply a routing
policy to routes advertised to a
peer or peer group.
peer { group-name | ip-address }
route-policy route-policy-name
export
By default, no routing policy is
applied.
To configure BGP community (IPv6 unicast/multicast address family):
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP IPv6 unicast address
family view, or BGP IPv6
multicast address family view.
• Enter BGP IPv6 unicast address
family view:
a. bgp as-number
b. address-family ipv6
[ unicast ]
• Enter BGP IPv6 multicast
address family view:
c. bgp as-number
d. address-family ipv6
multicast
N/A