R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

286
Ste
p
Command Remarks
4. Enter BGP IPv6 unicast
address family view.
address-family ipv6 [ unicast ] N/A
5. Enable BGP to exchange
IPv6 unicast routing
information with the 6PE peer
or peer group.
peer { group-name | ip-address }
enable
This function is disabled by
default.
6. Enable BGP to exchange
labeled IPv6 routes with the
6PE peer or peer group.
peer { group-name | ip-address }
label-route-capability
This function is disabled by
default.
Configuring optional 6PE capabilities
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP IPv6 unicast address
family view.
address-family ipv6 [ unicast ] N/A
4. Advertise COMMUNITY
attribute to the 6PE peer or
peer group.
peer { group-name | ip-address }
advertise-community
By default, the COMMUNITY
attribute is not advertised.
5. Advertise extended community
attribute to the 6PE peer or
peer group.
peer { group-name | ip-address }
advertise-ext-community
By default, the extended
community attribute is not
advertised.
6. Allow the local AS number to
appear in routes from the 6PE
peer or peer group and specify
the repeat times.
peer { group-name | ip-address }
allow-as-loop [ number ]
By default, the local AS number
is not allowed to appear in
routes from the 6PE peer or
peer group.
7. Specify an AS path list to filter
routes advertised to or received
from the 6PE peer or peer
group.
peer { group-name | ip-address }
as-path-acl as-path-acl-number
{ export | import }
By default, no AS path list is
specified.
8. Specify an IPv6 ACL to filter
routes advertised to or received
from the 6PE peer or peer
group.
peer { group-name | ip-address }
filter-policy acl6-number { export |
import }
By default, no ACL is specified.
9. Specify an IPv6 prefix list to
filter routes advertised to or
received from the 6PE peer or
peer group.
peer { group-name | ip-address }
prefix-list ipv6-prefix-name { export |
import }
By default, no IPv6 prefix list is
specified.
10. Specify a routing policy to filter
routes advertised to or received
from the 6PE peer or peer
group.
peer { group-name | ip-address }
route-policy route-policy-name
{ export | import }
By default, no routing policy is
specified.
11. Advertise a default route to the
6PE peer or peer group.
peer { group-name | ip-address }
default-route-advertise [ route-policy
route-policy-name ]
By default, no default route is
advertised.