R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

287
Ste
p
Command Remarks
12. Save all routes from the 6PE
peer or peer group.
peer { group-name | ip-address }
keep-all-routes
By default, routes from a peer
or peer group are not saved.
13. Configure BGP updates sent to
the 6PE peer or peer group to
carry only the public AS
number.
peer { group-name | ip-address }
public-as-only
By default, this feature is not
configured.
14. Specify the maximum number
of routes that BGP can receive
from the 6PE peer or peer
group.
peer { group-name | ip-address }
route-limit prefix-number [ { alert-only
discard | reconnect reconnect-time } |
percentage-value ] *
By default, the number of routes
that a router can receive from
the 6PE peer or peer group is
not limited.
15. Specify a preferred value for
routes received from the 6PE
peer or peer group.
peer { group-name | ip-address }
preferred-value value
By default, the preferred value
is 0.
16. Configure the device as a route
reflector and the 6PE peer or
peer group as a client.
peer { group-name | ip-address }
reflect-client
By default, no route reflector or
client is configured.
17. Configure the SoO attribute for
a peer or peer group.
peer { group-name | ip-address } soo
site-of-origin
By default, no SoO attribute is
configured for a peer or peer
group.
18. Return to user view.
return N/A
19. Display information about the
6PE peer or peer group.
display bgp peer ipv6 [ unicast ]
[ group-name group-name log-info |
ip-address { log-info | verbose } |
verbose ]
Available in any view.
20. Display routing information
advertised to or received from
the 6PE peer or peer group.
display bgp routing-table ipv6
[ unicast ] peer ip-address
{ advertised-routes | received-routes }
[ network-address prefix-length |
statistics ]
Available in any view.
21. Perform soft reset on the
inbound or outbound BGP 6PE
connection.
refresh bgp ip-address { export |
import } ipv6 [ unicast ]
Available in user view.
22. Reset a BGP 6PE connection.
reset bgp ip-address ipv6 [ unicast ] Available in user view.
Displaying and maintaining BGP
Displaying BGP
Execute display commands in any view (IPv4 unicast address family).
Task Command
Display BGP NSR status information.
display bgp non-stop-routing status
Display BGP IPv4 unicast peer group
information.
display bgp group ipv4 [ unicast ] [ vpn-instance
vpn-instance-name ] [ group-name group-name ]