R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

421

422

423

424

425

426

427

428

429

430

416

Configuration procedure

1. Configure IPv6 addresses for interfaces. (Details not shown.)

2. Configure basic OSPFv3:

# Configure Router A: enable OSPFv3 and specify the router ID as 1.1.1.1.

<RouterA> system-view

[RouterA] ospfv3 1

[RouterA-ospfv3-1] router-id 1.1.1.1

[RouterA-ospfv3-1] quit

[RouterA] interface gigabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] ospfv3 1 area 1

[RouterA-GigabitEthernet2/1/1] quit

[RouterA] interface gigabitethernet 2/1/2

[RouterA-GigabitEthernet2/1/2] ospfv3 1 area 1

[RouterA-GigabitEthernet2/1/2] quit

# Configure Router B: enable OSPFv3 and specify the router ID as 2.2.2.2.

<RouterB> system-view

[RouterB] ospfv3 1

[RouterB-ospfv3-1] router-id 2.2.2.2

[RouterB-ospfv3-1] quit

[RouterB] interface gigabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] ospfv3 1 area 0

[RouterB-GigabitEthernet2/1/1] quit

[RouterB] interface gigabitethernet 2/1/2

[RouterB-GigabitEthernet2/1/2] ospfv3 1 area 1

[RouterB-GigabitEthernet2/1/2] quit

# Configure Router C: enable OSPFv3 and specify the router ID as 3.3.3.3.

<RouterC> system-view

[RouterC] ospfv3 1

[RouterC-ospfv3-1] router-id 3.3.3.3

[RouterC-ospfv3-1] quit

[RouterC] interface gigabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] ospfv3 1 area 0

[RouterC-GigabitEthernet2/1/1] quit

[RouterC] interface gigabitethernet 2/1/2

[RouterC-GigabitEthernet2/1/2] ospfv3 1 area 2

[RouterC-GigabitEthernet2/1/2] quit

# Configure Router D: enable OSPFv3 and specify the router ID as 4.4.4.4.

<RouterD> system-view

[RouterD] ospfv3 1

[RouterD-ospfv3-1] router-id 4.4.4.4

[RouterD-ospfv3-1] quit

[RouterD] interface gigabitethernet 2/1/2

[RouterD-GigabitEthernet2/1/2] ospfv3 1 area 2

[RouterD-GigabitEthernet2/1/2] quit

# Display OSPFv3 neighbors on Router B.

[RouterB] display ospfv3 peer