R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

473
Ste
p
Command Remarks
4. Delete the specified
COMMUNITY attribute for BGP
routes.
apply comm-list
{ comm-list-number |
comm-list-name } delete
By default, no COMMUNITY
attribute is deleted for BGP routes.
5. Set the specified COMMUNITY
attribute for BGP routes.
apply community { none |
additive |
{ community-number&<1-32> |
aa:nn&<1-32> | internet |
no-advertise | no-export |
no-export-subconfed } *
[ additive ] }
By default, no community attribute is
set for BGP routes.
6. Set a cost for routes.
apply cost [ + | - ] value By default, no cost is set for routes.
7. Set a cost type for routes.
apply cost-type { external |
internal | type-1 | type-2 }
By default, no cost type is set for
routes.
8. Set the extended community
attribute for BGP routes.
apply extcommunity { rt
route-target }&<1-32>
[ additive ]
By default, no extended community
attribute is set for BGP routes.
9. Set the next hop for routes.
• Set the next hop for IPv4
routes:
apply ip-address next-hop
ip-address [ public |
vpn-instance
vpn-instance-name ]
• Set the next hop for IPv6
routes:
apply ipv6 next-hop
ipv6-address
By default, no next hop is set for
IPv4/IPv6 routes.
The apply ip-address next-hop and
apply ipv6 next-hop commands do
not apply to redistributed IPv4 and
IPv6 routes.
10. Set an IP precedence for
matching routes.
apply ip-precedence { value |
clear }
By default, no IP precedence is set.
11. Redistribute routes to a specified
ISIS level.
apply isis { level-1 | level-1-2 |
level-2 }
By default, routes are not
redistributed into a specified IS-IS
level.
12. Set a local preference for BGP
routes.
apply local-preference
preference
By default, no local preference is set
for BGP routes.
13. Set MPLS labels.
apply mpls-label By default, no MPLS label is set.
14. Set the ORIGIN attribute for
BGP routes.
apply origin { egp as-number |
igp | incomplete }
By default, no ORIGIN attribute is set
for BGP routes.
15. Set a preference.
apply preference preference By default, no preference is set.
16. Set a preferred value for BGP
routes.
apply preferred-value
preferred-value
By default, no preferred value is set
for BGP routes.
17. Set a prefix priority.
apply prefix-priority { critical |
high | medium }
By default, no prefix priority is set,
which means the prefix priority is
low.
18. Set a local QoS ID for matching
routes.
apply qos-local-id { value |
clear }
By default, no local QoS ID is set.
19. Set a tag value for RIP, OSPF,
and IS-IS route.
apply tag value
By default, no tag value is set for RIP,
OSPF, and IS-IS routes.