R0106-HP MSR Router Series Layer 3 - IP Routing Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

58

Device Interface

IP

address

Router B GigabitEthernet 2/1/1 192.168.2.1/24

Router B GigabitEthernet 2/1/2 192.168.1.2/24

Router C GigabitEthernet 2/1/1 192.168.2.2/24

Router C GigabitEthernet 2/1/2 192.168.4.2/24

Router D GigabitEthernet 2/1/1 192.168.3.2/24

Router D GigabitEthernet 2/1/2 192.168.4.1/24

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure basic RIP and enable static route redistribution into RIP so Router A and Router C have

routes to send to each other:

# Configure Router A.

<RouterA> system-view

[RouterA] rip 1

[RouterA-rip-1] version 2

[RouterA-rip-1] undo summary

[RouterA-rip-1] network 192.168.1.0

[RouterA-rip-1] network 101.1.1.0

[RouterA-rip-1] peer 192.168.2.2

[RouterA-rip-1] undo validate-source-address

[RouterA-rip-1] import-route static

[RouterA-rip-1] quit

[RouterA] interface gigabitethernet 2/1/2

[RouterA-GigabitEthernet2/1/2] rip bfd enable

[RouterA-GigabitEthernet2/1/2] quit

[RouterA] rip 2

[RouterA-rip-2] version 2

[RouterA-rip-2] undo summary

[RouterA-rip-2] network 192.168.3.0

[RouterA-rip-2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] rip 1

[RouterC-rip-1] version 2

[RouterC-rip-1] undo summary

[RouterC-rip-1] network 192.168.2.0

[RouterC-rip-1] network 192.168.4.0

[RouterC-rip-1] network 100.1.1.0

[RouterC-rip-1] peer 192.168.1.1

[RouterC-rip-1] undo validate-source-address

[RouterC-rip-1] import-route static

[RouterC-rip-1] quit

[RouterC] interface gigabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] rip bfd enable