R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

131
Port-block-withdraw : Disabled
Alarm : Disabled
NAT hairpinning:
There are 2 interfaces enabled with NAT hairpinning.
Interface: GigabitEthernet2/1/1
GigabitEthernet2/1/2
NAT mapping behavior:
Mapping mode: Endpoint-Independent
ACL : 2050
NAT ALG:
DNS : Enabled
FTP : Disabled
H323 : Enabled
ICMP-ERROR : Enabled
ILS : Enabled
MGCP : Enabled
NBT : Enabled
PPTP : Enabled
RTSP : Enabled
RSH : Enabled
SCCP : Enabled
SIP : Disabled
SQLNET : Enabled
TFTP : Enabled
XDMCP : Enabled
NAT port block group information:
There are 3 NAT port block groups.
Port block group 1:
Port range: 1-65535
Block size: 256
Local IP address information:
Start address End address VPN instance
172.16.1.1 172.16.1.254 ---
192.168.1.1 192.168.1.254 vpna
192.168.3.1 192.168.3.254 vpna
Global IP pool information:
Start address End address
201.1.1.1 201.1.1.10
201.1.1.21 201.1.1.25
Port block group 2:
Port range: 10001-30000
Block size: 500
Local IP address information: