R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

132
Start address End address VPN instance
10.1.1.1 10.1.10.255 vpnb
Global IP pool information:
Start address End address
202.10.10.101 202.10.10.120
Port block group 3:
Port range: 1-65535
Block size: 256
Local IP address information:
Start address End address VPN instance
--- --- ---
Global IP pool information:
Start address End address
--- ---
NAT outbound port block group information:
There are 2 outbound port block group items.
Interface: GigabitEthernet2/1/2
Port block group: 2
Interface: GigabitEthernet2/1/2
Port block group: 10
The output shows all NAT configuration information. Table 27 describes only the fields for the output of
the nat hairpin enable, nat mapping-behavior, and nat alg commands.
Table 27 Command output
Field Descri
p
tion
NAT address group information
Information about the NAT address group. See Table 28 for
output
description.
NAT server group information
Information about the internal server group. See Table 39 for
output
description.
NAT inbound information:
Inbound dynamic NAT configuration. See Table 31 for output
description.
NAT outbound information
Outbound dynamic NAT configuration. See Table 34 for out
put
description.
NAT internal server information NAT Server configuration. See Table 38 for output description.
Static NAT mappings Static NAT mappings. See Table 41 for output description.
NAT DNS mappings NAT with DNS mappings. See Table 29 for output description.
NAT logging NAT logging configuration. See Table 32 for output description.
NAT hairpinning NAT hairpin configuration.
There are n interfaces enabled NAT
hairpinning
Specifies the number of interfaces with NAT hairpin enabled.
Interface NAT hairpin-enabled interfaces.