R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

133
Field Descri
p
tion
NAT mapping behavior
Mapping behavior mode of PAT: Endpoint-Independent or Address
and Port-Dependent.
ACL ACL number. If no ACL is used for NAT, this field displays hyphens (---).
NAT ALG NAT with ALG configuration for different protocols.
NAT port block group information
Configuration information about NAT port block groups. See Table 37
for output description.
NAT outbound port block group
information
Information about port block group application. See Table 35 for
output description.
display nat address-group
Use display nat address-group to display NAT address group information.
Syntax
display nat address-group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies the ID of a NAT address group. The value range is 0 to 65535. If you do not
specify the group-number argument, this command displays information about all NAT address groups.
Examples
# Display information about all NAT address groups.
<Sysname> display nat address-group
NAT address group information:
There are 5 NAT address groups.
Address group 1:
Address information:
Start address End address
202.110.10.10 202.110.10.15
Address group 2:
Address information:
Start address End address
202.110.10.20 202.110.10.25
202.110.10.30 202.110.10.35
Address group 3:
Port range: 1024-65535
Address information:
Start address End address