R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

147
Table 38 Command output
Field Descri
p
tion
NAT internal server information Information about NAT Server configuration.
Interface Interface where NAT Server is configured.
Protocol Protocol number and type of the internal server.
Global IP/port
External IP address and port number of the internal server.
• Global IP—A single IP address or an address pool of consecutive
addresses. If you use Easy IP, this field displays the address of the
specified interface. If you do not specify an address for the interface, the
Global IP field displays hyphens (---).
• port—A single port number or a port pool of consecutive port numbers.
If no port number is in the specified protocol, the port field displays
hyphens (---).
Local IP/port
For common NAT Server, this field displays the internal IP address and port
number of the server.
• Local IP—A single IP address or an address pool of consecutive
addresses.
• port—A single port number or a port pool of consecutive port numbers.
If no port number is in the specified protocol, the port field displays
hyphens (---).
For load sharing NAT Server, this field displays the internal server group
name, IP address, port number, and number of connections of each
member.
Global VPN
MPLS L3VPN instance to which the external IP address belongs. If you do not
specify any VPN instance, this field is not displayed.
Local VPN
MPLS L3VPN instance to which the internal IP address belongs. If you do not
specify any VPN instance, this field is not displayed.
Related commands
nat server
display nat server-group
Use display nat server-group to display internal server group configuration.
Syntax
display nat server-group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies the ID of the internal server group. The value range is 0 to 65535. If you do not
specify this argument, this command displays configuration about all internal server groups.