R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

153
MSR4000:
display nat statistics [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify any card, this command
displays NAT statistics for all cards. (MSR4000.)
Examples
# Display all NAT statistics.
<Sysname> display nat statistics
Total session entries: 100
Total EIM entries: 1
Total inbound NO-PAT entries: 0
Total outbound NO-PAT entries: 0
Total static port block entries: 10
Total dynamic port block entries: 15
Active static port block entries: 0
Active dynamic port block entries: 0
Table 42 Command output
Field Descri
p
tion
Total session entries Number of NAT session entries.
Total EIM entries Number of EIM entries.
Total inbound NO-PAT entries Number of inbound NO-PAT entries.
Total outbound NO-PAT entries Number of outbound NO-PAT entries.
Total static port block entries Number of static NAT444 mappings.
Total dynamic port block entries
Number of dynamic NAT444 mappings that can be
created. It equals the number of port blocks for dynamic
assignment, including the assigned and unassigned.
Active static port block entries Number of static NAT444 mappings that are in use.
Active dynamic port block entries
Number of dynamic NAT444 mappings that have been
created. It equals the number of assigned port blocks.
global-ip-pool
Use global-ip-pool to add a public IP address member to a NAT port block group.
Use undo global-ip-pool to delete a public IP address member from a NAT port block group.