R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

156
Examples
# Add a private IP address member to the port block group 1. The private IP address member consists of
IP addresses from 172.16.1.1 to 172.16.1.255 on VPN instance vpn1.
<Sysname> system-view
[Sysname] nat port-block-group 1
[Sysname-nat-port-block-group-1] local-ip-address 172.16.1.1 172.16.1.255 vpn-instance
vpn1
Related commands
nat port-block-group
nat address-group
Use nat address-group to create a NAT address group and enter its view.
Use undo nat address-group to remove a NAT address group.
Syntax
nat address-group group-number
undo nat address-group group-number
Default
No NAT address group exists.
Views
System view
Predefined user roles
network-admin
Parameters
group-number: Assigns an ID to the NAT address group. The value range for this argument is 0 to 65535.
Usage guidelines
A NAT address group consists of multiple group members and each group member specifies an address
pool configured with the address command.
Examples
# Create a NAT address group numbered 1.
<Sysname> system-view
[Sysname] nat address-group 1
Related commands
• address
• display nat address-group
• display nat all
• nat inbound
• nat outbound