R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

219
Inpcb flags: N/A
Inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
Send VRF: 0xffff
Receive VRF: 0xffff
Table 55 Command output
Field Description
Total UDP socket number Total number of UDP sockets.
Slot Slot number of the card.
CPU CPU number.
Creator
Name of the operation that created the socket. The number in brackets is
the process number of the creator.
State Socket state.
Options Socket option.
Error Error code.
Receiving
buffer(cc/hiwat/lowat/state)
Displays receive buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
{ CANTSENDMORE—Unable to send data to the peer.
{ CANTRCVMORE—Unable to receive data from the peer.
{ RCVATMARK—Receiving tag.
{ N/A—None of the above states.
Sending
buffer(cc/hiwat/lowat/state)
Displays send buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
{ CANTSENDMORE—Unable to send data to the peer.
{ CANTRCVMORE—Unable to receive data from the peer.
{ RCVATMARK—Receiving tag.
{ N/A—None of the above states.
Type
Socket type:
• 1—SOCK_STREAM. This socket uses TCP to provide reliable
transmission of byte streams.
• 2—SOCK_DGRAM. This socket uses UDP to provide datagram
transmission.
• 3—SOCK_RAW. This socket allows an application to change the next
upper-layer protocol header.
• N/A—None of the above types.
Protocol Number of the protocol using the socket.