R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

232
UDP helper commands
display udp-helper interface
Use display udp-helper interface to display information about broadcast to unicast conversion by UDP
helper on an interface.
Syntax
display udp-helper interface interface-type interface-number
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
This command displays information about destination servers and total number of unicast packets
converted from UDP broadcast packets by UDP helper.
Examples
# Display information about broadcast to unicast conversion by UDP helper on GigabitEthernet 2/1/1.
<Sysname> display udp-helper interface gigabitethernet 2/1/1
Interface Server VPN instance Server address Packets sent
GigabitEthernet2/1/1 abc 192.1.1.2 0
GigabitEthernet2/1/1 N/A 192.1.1.2 0
Table 56 Command output
Field Descri
p
tion
Interface Interface name.
Server VPN instance VPN instance to which the destination server belongs.
Server address Destination server to which UDP packets are forwarded.
Packets sent
Number of unicast packets that are converted from broadcast packets by UDP
helper.
Related commands
• reset udp-helper statistics
• udp-helper server