R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

233
reset udp-helper statistics
Use reset udp-helper statistics to clear packet statistics for UDP helper.
Syntax
reset udp-helper statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear the packet statistics for UDP helper.
<Sysname> reset udp-helper statistics
Related commands
display udp-helper interface
udp-helper broadcast-map
Use udp-helper broadcast-map to specify a multicast address for UDP helper to convert broadcast to
multicast.
Use undo udp-helper broadcast-map to restore the default.
Syntax
udp-helper broadcast-map multicast-address [ acl acl-number ]
undo udp-helper broadcast-map multicast-address
Default
No multicast address is specified for UDP helper.
Views
Interface view
Predefined user roles
network-admin
Parameters
multicast-address: Specifies the destination multicast address to which the destination broadcast address
is converted.
acl acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter incoming
broadcast packets for UDP helper. Packets permitted by the ACL can be converted.
• For a basic ACL, the value range is 2000 to 2999.
• For an advanced ACL, the value range is 3000 to 3999.
Usage guidelines
Use this command on the interface that receives broadcast packets.