R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

245
Related commands
ipv6 nd ra prefix
display ipv6 neighbors
Use display ipv6 neighbors to display IPv6 neighbor information.
Syntax
MSR2000/MSR3000:
display ipv6 neighbors { ipv6-address | all | dynamic | interface interface-type interface-number |
static | vlan vlan-id } [ verbose ]
MSR4000:
display ipv6 neighbors { { ipv6-address | all | dynamic | static } [ slot slot-number ] | interface
interface-type interface-number | vlan vlan-id } [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-address: Specifies the IPv6 address of a neighbor whose information is displayed.
all: Displays information about all neighbors, including neighbors acquired dynamically and configured
statically on the public network and all private networks.
dynamic: Displays information about all neighbors acquired dynamically.
static: Displays information about all neighbors configured statically.
slot slot-number: Specifies a card by its slot number. (MSR4000)
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Displays information about neighbors in the specified VLAN. The value range for VLAN ID
is 1 to 4094.
verbose: Displays detailed neighbor information.
Usage guidelines
You can use the reset ipv6 neighbors command to clear IPv6 neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
Type: S-Static D-Dynamic O-Openflow I-Invalid
IPv6 Address Link Layer VID Interface State T Age
FE80::200:5EFF:FE32:B800 0000-5e32-b800 N/A GE2/1/1 REACH D 10
# Display detailed information about all neighbors.
<Sysname> display ipv6 neighbors all verbose
Type: S-Static D-Dynamic O-Openflow I-Invalid