R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

247
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] | interface interface-type
interface-number | vlan vlan-id } count
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries created dynamically and
configured statically.
dynamic: Displays the total number of neighbor entries created dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Specifies a card by its slot number. (MSR4000).
interface interface-type interface-number: Specifies an interface by its type and number.
vlan vlan-id: Displays the total number of neighbor entries in the specified VLAN. The value range for
VLAN ID is 1 to 4094.
Examples
# Display the total number of neighbor entries created dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total number of dynamic entries: 2
display ipv6 neighbors vpn-instance
Use display ipv6 neighbors vpn-instance to display neighbor information about a VPN.
Syntax
display ipv6 neighbors vpn-instance vpn-instance-name [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31
characters. The VPN must already exist.
count: Displays the total number of neighbor entries in the specified VPN.
Examples
# Display neighbor information about the VPN vpn1.
<Sysname> display ipv6 neighbors vpn-instance vpn1
Type: S-Static D-Dynamic O-Openflow I-Invalid
IPv6 Address Link Layer VID Interface State T Age