R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

305
Field Descri
p
tion
Using pool
Address pool applied to the interface.
If no address pool is applied to the interface, global is displayed. The
DHCPv6 server selects a global address pool to assign a prefix, an
address, and other configuration parameters to a client.
Preference value
Server preference in the DHCPv6 Advertise message. The value range is
0 to 255. The bigger the value is, the higher preference the server has.
Allow-hint Indicates whether desired address/prefix assignment is enabled.
Rapid-commit Indicates whether rapid address/prefix assignment is enabled.
display ipv6 dhcp server conflict
Use display ipv6 dhcp server conflict to display information about IPv6 address conflicts.
Syntax
display ipv6 dhcp server conflict [ address ipv6-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If you do not specify
any IPv6 address, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
• The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an IPv6
address conflict.
• The DHCPv6 server discovers that the only assignable address in the address pool is its own IPv6
address.
Examples
# Display information about all address conflicts.
<Sysname> display ipv6 dhcp server conflict
IPv6 address Detect time
2001::1 Apr 25 16:57:20 2007
1::1:2 Apr 25 17:00:10 2007
Table 75 Command output
Field Description
IPv6 address Conflicted IPv6 address.
Detect time Time when the conflict was discovered.