R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

323
reset ipv6 dhcp server conflict
Use reset ipv6 dhcp server conflict to clear IPv6 address conflict information.
Syntax
reset ipv6 dhcp server conflict [ address ipv6-address ]
Views
User view
Predefined user roles
network-admin
Parameters
address ipv6-address: Clears conflict information for the specified IPv6 address. If you do not specify any
IPv6 address, the command clears all IPv6 address conflict information.
Usage guidelines
Address conflicts occur when dynamically assigned IP addresses have been statically configured for
other hosts. After the conflicts are resolved, you can use the reset ipv6 dhcp server conflict command to
clear conflict information so that the conflicted addresses can be assigned to clients.
Examples
# Clear all IPv6 address conflict information.
<Sysname> reset ipv6 dhcp server conflict
Related commands
display ipv6 dhcp server conflict
reset ipv6 dhcp server expired
Use reset ipv6 dhcp server expired to clear binding information for lease-expired IPv6 addresses.
Syntax
reset ipv6 dhcp server expired [ address ipv6-address | pool pool-name ]
Views
User view
Predefined user roles
network-admin
Parameters
address ipv6-address: Clears binding information for the specified lease-expired IPv6 address.
pool pool-name: Clears binding information for lease-expired IPv6 addresses in the address pool
specified by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
If you do not specify any parameters, this command clears binding information for all lease-expired IPv6
addresses.
Examples
# Clear binding information for expired IPv6 address 2001:f3e0::1.