R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

350
Use undo ipv6 dhcp snooping option remote-id enable to restore the default.
Syntax
ipv6 dhcp snooping option remote-id enable
undo ipv6 dhcp snooping option remote-id enable
Default
Option 37 is not supported.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only when DHCPv6 snooping is globally enabled.
Examples
# Enable support for Option 37.
<Sysname> system-view
[Sysname] ipv6 dhcp snooping enable
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ipv6 dhcp snooping option remote-id enable
Related commands
• ipv6 dhcp snooping enable
• ipv6 dhcp snooping option remote-id string
ipv6 dhcp snooping option remote-id string
Use ipv6 dhcp snooping option remote-id string to specify the content as the remote ID for Option 37.
Use undo ipv6 dhcp snooping option remote-id string to restore the default.
Syntax
ipv6 dhcp snooping option remote-id [ vlan vlan-id ] string remote-id
undo ipv6 dhcp snooping option remote-id [ vlan vlan-id ]
Default
The DHCPv6 snooping device uses its DUID as the content for Option 37.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
vlan vlan-id: Specifies the VLAN where the DHCPv6 clients resides.
remote-id: Specifies the a string of 1 to 128 characters as the remote ID.