R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

352
Views
User view
Predefined user roles
network-admin
Parameters
address ipv6-address: Clears the DHCPv6 snooping entry for the specified IPv6 address.
vlan vlan-id: Clears DHCPv6 snooping entries for the specified VLAN.
all: Clears all DHCPv6 snooping entries.
Usage guidelines
This command applies to all slots on MSR4000.
Examples
# Clear all DHCPv6 snooping entries.
<Sysname> reset ipv6 dhcp snooping binding all
Related commands
display ipv6 dhcp snooping binding
reset ipv6 dhcp snooping packet statistics
Use reset ipv6 dhcp snooping packet statistics to clear DHCPv6 packet statistics for DHCPv6 snooping.
Syntax
MSR2000/MSR3000:
reset ipv6 dhcp snooping packet statistics
MSR4000:
reset ipv6 dhcp snooping packet statistics [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify any card, this command clears
DHCPv6 packet statistics for the card where the command is executed. (MSR4000.)
Examples
# Clear DHCPv6 packet statistics for DHCPv6 snooping.
<Sysname> reset ipv6 dhcp snooping packet statistics
Related commands
display ipv6 dhcp snooping packet statistics