R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

359
Usage guidelines
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you use it on a live network.
This command might fail to restore the default settings for some commands for reasons such as command
dependencies or system restrictions. Use the display this command in interface view to identify these
commands. Use their undo forms or follow the command reference to restore their default settings. If your
restoration attempt still fails, follow the error message instructions to resolve the problem.
Examples
# Restore the default settings of interface tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] default
description
Use description to configure a description for a tunnel interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a tunnel interface is Tunnelnumber Interface, for example, Tunnel1 Interface.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
text: Specifies a description for the interface, a case-sensitive string of 1 to 255 characters.
Usage guidelines
Configure descriptions for different interfaces for identification and management purposes.
This command configures an interface description and does not have any other function. You can use the
display interface command to display the configured interface description.
Examples
# Configure the description for interface Tunnel 1 as tunnel1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] description tunnel1
Related commands
display interface tunnel