R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)
363
Tunnel TOS 0xC8, Tunnel TTL 255
Tunnel protocol/transport GRE/IPv6
GRE key value is 1
Checksumming of GRE packets disabled
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
Table 89 Command output
Field Descri
p
tion
Tunnel1 Information about the tunnel interface Tunnel1.
Current state
State of the tunnel interface:
• Administratively DOWN—The interface has been shut down by
using the shutdown command.
• DOWN—The interface is administratively up but its physical state is
down.
• DOWN (Tunnel-Bundle administratively down)—The tunnel bundle
interface to which the interface belongs has been shut down by the
shutdown command.
• UP—Both the administrative and physical states of the interface are
up.
Line protocol state
Link layer protocol state of the tunnel interface. The value is determined
by the parameter negotiation on the link layer.
• UP—The protocol state of the interface is up.
• UP (spoofing)—The link protocol state of the interface is up, but the
link is temporarily set up on demand or does not exist. This attribute
is available for null interfaces and loopback interfaces.
• DOWN—The protocol state of the interface is down.
Description Description of the tunnel interface.
Bandwidth Expected bandwidth for the tunnel interface.
Maximum Transmit Unit MTU of the tunnel interface.
Internet Address
IP address of the tunnel interface.
If no IP address is assigned to the interface, this field displays Internet
protocol processing: disabled, and the tunnel interface cannot process
packets.
Primary indicates it is the primary IP address of the interface.
Tunnel source
Source address of the tunnel. If a source interface is specified for the
tunnel interface, this field also displays the source interface in
parentheses.
destination Destination address of the tunnel.