R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)
364
Field Descri
p
tion
Tunnel keepalive enabled, Period(50
s), Retries(3)
Keepalive is enabled to detect the state of the tunnel interface. In this
example, keepalive packets are sent every 50 seconds, and the
maximum sending times are three.
Tunnel TOS ToS of tunneled packets.
Tunnel TTL TTL of tunneled packets.
Tunnel protocol/transport
Tunnel mode and transport protocol:
• GRE/IP—GRE over IPv4 tunnel mode.
• GRE/IPv6—GRE over IPv6 tunnel mode.
• IP/IP—IPv4 over IPv4 tunnel mode.
• IPv6—IPv6 tunnel mode.
• IPv6/IP—IPv6 over IPv4 manual tunnel mode.
• IPv6/IP 6to4—IPv6 over IPv4 6to4 tunnel mode.
• IPv6/IP auto-tunnel—Automatic IPv6 over IPv4 tunnel mode.
• IPv6/IP ISATAP—IPv6 over IPv4 ISATAP tunnel mode.
GRE key value is 1 The GRE tunnel interface key is 1.
Checksumming of GRE packets
disabled
The GRE packet checksum function is disabled.
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Urgent output queue statistics:
Number of packets in the queue/maximum number of packets that the
queue can contain/number of packets discarded in the queue.
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Protocol output queue statistics:
Number of packets in the protocol output queue/maximum number of
packets that the queue can contain/number of packets discarded in
the queue.
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
FIFO output queue statistics:
Number of packets in the FIFO output queue/maximum number of
packets that the queue can contain/number of packets discarded in
the queue.
When a CBQ or WFQ queue is configured, this field displays statistics
of the CBQ or WFQ queue.
Last clearing of counters Last time when counters were cleared.
Last 300 seconds input: 0 bytes/sec,
0 packets/sec
Average input rate in the last 300 seconds.
Last 300 seconds input rate: 0
bytes/sec, 0 bits/sec, 0 packets/sec
Average output rate in the last 300 seconds.
# Display brief information about the interface Tunnel 1.
<Sysname> display interface tunnel 1 brief
Brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Tun1 UP UP 1.1.1.1 aaaaaaaaaaaaaaaaaaaaaaaaaaa
# Display brief information about interface Tunnel 1, including the complete interface description.
<Sysname> display interface tunnel 1 brief description