R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

365
Brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Tun1 UP UP 1.1.1.1 aaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
# Display information about interfaces in DOWN state and the causes.
<Sysname> display interface tunnel brief down
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
Tun0 DOWN Not connected
Tun1 DOWN Not connected
Table 90 Command output
Field Descri
p
tion
Brief information of interface(s)
under route mode
Brief information about Layer 3 interfaces.
Link: ADM - administratively
down; Stby - standby
Link status:
• ADM—The interface has been administratively shut down. To bring it up,
use the undo shutdown command.
• Stby—The interface is a backup interface. To show the primary interface,
use the display interface-backup state command.
Protocol: (s) - spoofing
(s) indicates that the data link layer protocol state is UP, but the link is
temporarily set up on demand or does not exist. This attribute is available for
null interfaces and loopback interfaces.
Interface Abbreviated interface name.
Link
Physical link state of the interface:
• UP—The link is physically up.
• DOWN—The link is physically down.
• ADM—The link has been administratively shut down. To bring it up, use
the undo shutdown command.
• Stby—The interface is a backup interface.
Protocol
Data link layer protocol state of the interface:
• UP—The data link protocol state of the interface is up.
• DOWN—The data link protocol state of the interface is down.
• UP(s)—The data link protocol state of the interface is up, but the link is
temporarily set up on demand or does not exist. This attribute is available
for null interfaces and loopback interfaces.
Main IP Primary IP address of the interface.
Description Description of the interface.