R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

370
Related commands
display interface tunnel
service
Use service to specify a service card for forwarding the traffic on the tunnel interface.
Use undo service to restore the default.
Syntax
service slot slot-number
undo service slot
The following matrix shows the support of MSR routers for the command:
Hardware Command com
p
atibilit
y
MSR2000 No
MSR3000 No
MSR4000 Yes
Default
No service card is specified for the tunnel interface.
Views
Tunnel interface view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds
the card.
Usage guidelines
If no service card is specified for forwarding the traffic on the tunnel interface, the traffic is processed on
the card that receives the traffic.
Some functions, such as IPsec anti-replay, require that traffic for the same tunnel interface be processed
on the same card. If such a function is configured, you must use this command to specify a service card
for forwarding the traffic on a tunnel interface.
If the specified service card is removed, traffic on the tunnel interface cannot be forwarded even if the
tunnel interface is up. When the service card is reinstalled, traffic forwarding resumes on the card.
Examples
# Specify the card in slot 2 to forward traffic for interface Tunnel 200.
<Sysname> system-view
[Sysname] interface tunnel 200
[Sysname-Tunnel200] service slot 2