R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

405
# Clear statistics for all ADVPN domains.
<Sysname> reset vam server statistics
Related commands
display vam server statistics
server enable
Use server enable to enable the VAM server feature for an ADVPN domain.
Use undo server enable to disable the VAM server feature for an ADVPN domain.
Syntax
server enable
undo server enable
Default
The VAM server feature is disabled.
Views
ADVPN domain view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You can also execute the vam server enable command in system view to enable the VAM server feature
for one or all ADVPN domains.
Examples
# Enable the VAM server feature for ADVPN domain 1.
<Sysname> system-view
[Sysname] vam server advpn-domain 1
[Sysname-vam-server-domain-1] server enable
Related commands
vam server enable
shortcut interest
Use shortcut interest to configure rules for establishing IPv4 spoke-to-spoke tunnels.
Use undo shortcut interest to restore the default.
Syntax
shortcut interest { all | acl { acl-number | name acl-name } }
undo shortcut interest
Default
No rules for establishing IPv4 spoke-to-spoke tunnels are configured. Spokes are not allowed to establish
direct tunnels.