R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

418
Usage guidelines
The VAM server assigns the rules for establishing IPv6 spoke-to-spoke tunnels to a hub. If the specified
VAM client is a spoke, the number of rules is displayed as 0.
Examples
# Display IPv6 spoke-to-spoke tunnel establishment rules received by all VAM clients.
<Sysname> display vam client shortcut ipv6 interest
Client name : abc
ADVPN domain name: 1
Client type : Spoke
ACL ruls : 0
Client name : hub
ADVPN domain name: 2
Client type : Hub
ACL rules : 2
Rule 1: Permit
Protocol : TCP
Start source address : 0::0
End source address : FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Start source port : 0
End source port : 65535
Start destination address: 2000::0
End destination address : 2000:1::0
Start destination port : 0
End destination port : 65535
Rule 2: Deny
Protocol : All
Start source address : 0::0
End source address : FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Start source port : 0
End source port : 65535
Start destination address: 0::0
End destination address : FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
Start destination port : 0
End destination port : 65535
Client name : spoke
ADVPN domain name:
Client type : Unknown
ACL rules : 0
# Display IPv6 spoke-to-spoke tunnel establishment rules received by VAM client abc.
<Sysname> display vam client shortcut ipv6 interest name abc
Client name : spoke
ADVPN domain name:
Client type : Unknown
ACL rules : 0