R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

419
Table 100 Command output
Field Descri
p
tion
Client type
VAM client type:
• Hub.
• Spoke.
• Unknown.
ACL rules Number of ACL rules received by the VAM client.
Rule n: operation
n represents the number of an ACL rule.
Rule operation:
• Permit—Allows the spokes to establish direct tunnels.
• Deny—Disallows the spokes to establish direct tunnels.
• Discard—Discards the packet.
Protocol
Matches the specified protocol.
Start source address Start address of the source IPv6 address range to be matched.
End source address End address of the source IPv6 address range to be matched.
Start source port Start port number of the source port number range to be matched.
End source port End port number of the source port number range to be matched.
Start destination address Start address of the destination IPv6 address range to be matched.
End destination address End address of the destination IPv6 address range to be matched.
Start destination port Start port number of the destination port number range to be matched.
End destination port End port number of the destination port number range to be matched.
display vam client statistics
Use display vam client statistics to display VAM client statistics.
Syntax
display vam client statistics [ name client-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name client-name: Displays statistics for the specified VAM client. The client-name argument is a
case-insensitive string of 1 to 63 characters that can only include letters, digits, and dots (.). If you do not
specify this option, the command displays statistics for all VAM clients.