R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

446
Field Description
Link protocol
Link layer protocol for the ADVPN tunnel:
• UDP.
• GRE.
• IPsec-UDP.
• IPsec-GRE.
Number of sessions Number of ADVPN tunnels established on the tunnel interface.
Private address Private address of the ADVPN tunnel peer.
Public address Public address of the ADVPN tunnel peer.
ADVPN port
UDP port number for the ADVPN tunnel when the link layer protocol is UDP or
IPsec-UDP.
SA's SPI
SPIs for the inbound and outbound SAs when link layer protocol is IPsec-UDP or
IPsec-GRE.
Behind NAT Whether NAT traversal is used.
Session type
ADVPN tunnel type:
• Hub-Hub—Both the local end and the remote end are a hub.
• Hub-Spoke—The local end is a hub and the remote end is a spoke.
• Spoke-Hub—The local end is a spoke and the remote end is a hub.
• Spoke-Spoke—Both the local end and the remote end are a spoke.
State
ADVPN tunnel state:
• Success—The tunnel has been already established.
• Establishing—The tunnel is being established.
• Dumb—The tunnel failed to be established and is now quiet.
Holding time Duration time that the tunnel is in the current state, in the format of xH yM zS.
Input
Statistics for incoming packets, including the number of all packets, data packets,
control packets, multicast packets, and erroneous packets.
Output
Statistics for outgoing packets, including the number of all packets, data packets,
control packets, multicast packets, and erroneous packets.
Related commands
reset advpn session
keepalive
Use keepalive to set the keepalive interval and keepalive attempts for an ADVPN tunnel interface.
Use undo keepalive to restore the default.
Syntax
keepalive interval time-interval retry retry-times
undo keepalive
Default
The keepalive interval is 180 seconds and the maximum number of keepalive attempts is 3.