R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

36
Default
No DHCP address pool is created.
Views
System view
Predefined user roles
network-admin
Parameters
pool-name: Specifies the name for the DHCP address pool, a case-insensitive string of 1 to 63 characters
used to uniquely identify this pool.
Usage guidelines
A DHCP address pool is used to store the configuration parameters to be assigned to DHCP clients.
Examples
# Create a DHCP address pool named pool1.
<Sysname> system-view
[Sysname] dhcp server ip-pool pool1
[Sysname-dhcp-pool-pool1]
Related commands
• dhcp server apply ip-pool
• display dhcp server pool
dhcp server ping packets
Use dhcp server ping packets to specify the maximum number of ping packets.
Use undo dhcp server ping packets to restore the default.
Syntax
dhcp server ping packets number
undo dhcp server ping packets
Default
The maximum number of ping packets is 1.
Views
System view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of ping packets, in the range of 0 to 10. A value of 0 indicates
that the DHCP server does not perform address conflict detection.
Usage guidelines
To avoid IP address conflicts, the DHCP server pings an IP address before assigning it to a DHCP client.