R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

45
network-operator
Parameters
pool pool-name: Specifies an address pool by its name, a case-insensitive string of 1 to 63 characters.
If you do not specify this option, the command displays information about all address pools.
Examples
# Display the DHCP server statistics.
<Sysname> display dhcp server statistics
Pool number: 1
Pool utilization: 0.39%
Bindings:
Automatic: 1
Manual: 0
Expired: 0
Conflict: 1
Messages received: 10
DHCPDISCOVER: 5
DHCPREQUEST: 3
DHCPDECLINE: 0
DHCPRELEASE: 2
DHCPINFORM: 0
BOOTPREQUEST: 0
Messages sent: 6
DHCPOFFER: 3
DHCPACK: 3
DHCPNAK: 0
BOOTPREPLY: 0
Bad Messages: 0
Table 9 Command output
Field Description
Pool number
Total number of address pools. This field is not displayed when you display
statistics for a specific address pool.
Pool utilization
Pool utilization rate:
• If you display statistics for all address pools, this field displays the
utilization rate of all address pools.
• If you display statistics for an address pool, this field displays the pool
utilization rate of the specified address pool.
Bindings
Bindings include the following types:
• Automatic—Number of dynamic bindings.
• Manual—Number of static bindings.
• Expired—Number of expired bindings.
Conflict
Total number of conflict addresses. This field is not displayed if you display
statistics for a specific address pool.