R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

49
Default
No IP addresses are excluded from dynamic allocation in an address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies excluded IP addresses. &<1-8> indicates that you can specify up to eight IP
addresses, separated by spaces.
Usage guidelines
The excluded IP addresses in an address pool are still assignable in other address pools.
You can exclude a maximum of 4096 IP addresses in an address pool.
If you do not specify any parameters, the undo forbidden-ip command deletes all excluded IP addresses.
Examples
# Exclude IP addresses 192.168.1.3 and 192.168.1.10 from dynamic allocation in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] forbidden-ip 192.168.1.3 192.168.1.10
Related commands
• dhcp server forbidden-ip
• display dhcp server pool
gateway-list
Use gateway-list to specify gateway addresses in a DHCP address pool or a DHCP secondary subnet.
Use undo gateway-list to remove the specified gateway addresses from a DHCP address pool or a DHCP
secondary subnet.
Syntax
gateway-list ip-address&<1-8>
undo gateway-list [ ip-address&<1-8> ]
Default
No gateway address is configured in a DHCP address pool or a DHCP secondary subnet.
Views
DHCP address pool view, DHCP secondary subnet view
Predefined user roles
network-admin
Parameters
ip-address&<1-8>: Specifies gateways. &<1-8> indicates that you can specify up to eight gateway
addresses separated by spaces. Gateway addresses must reside on the same subnet as the assignable
IP addresses.