R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

73
Field Description
IP address IP address of the DHCP client.
MAC address MAC address of the DHCP client.
Type
Relay entry type:
• Dynamic—The relay agent creates a dynamic relay entry
upon receiving an ACK response from the DHCP server.
• Temporary—The relay agent creates a temporary relay entry
upon receiving a REQUEST packet from a DHCP client.
Interface
Layer 3 interface connected to the DHCP client. N/A is displayed
for relay entries without interface information.
Related commands
• dhcp relay client-information record
• reset dhcp relay client-information
display dhcp relay information
Use display dhcp relay information to display Option 82 configuration information for the DHCP relay
agent.
Syntax
display dhcp relay information [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays Option 82 configuration information for the specified
interface. If you do not specify any interface, the command displays Option 82 configuration information
about all interfaces.
Examples
# Display Option 82 configuration information for all interfaces.
<Sysname> display dhcp relay information
Interface: Vlan-interface100
Status: Enable
Strategy: Replace
Circuit ID Pattern: Verbose
Remote ID Pattern: Sysname
Circuit ID format-type: Undefined
Remote ID format-type: ASCII
Node identifier: aabbcc
Interface: Vlan-interface200
Status: Enable