R0106-HP MSR Router Series Layer 3 - IP Services Command Reference(V7)

74
Strategy: Replace
Circuit ID Pattern: User Defined
Remote ID Pattern: User Defined
Circuit ID format-type: ASCII
Remote ID format-type: ASCII
User defined:
Circuit ID: vlan100
Remote ID: device001
Table 13 Command output
Field Description
Interface Interface name.
Status
Option 82 states:
• Enable—DHCP relay agent support for Option 82 is enabled.
• Disable—DHCP relay agent support for Option 82 is disabled.
Strategy
Handling strategy for request messages containing Option 82, Drop,
Keep, or Replace.
Circuit ID Pattern
Padding content mode of the Circuit ID sub-option, Verbose, Normal, or
User Defined.
Remote ID Pattern
Padding content mode of the Remote ID sub-option, Sysname, Normal, or
User Defined.
Circuit ID format-type Padding format of the Circuit ID sub-option, ASCII, Hex, or Undefined.
Remote ID format-type Padding format of the Remote ID sub-option, ASCII, Hex, or Undefined.
Node identifier Access node identifier.
User defined Content of the user-defined sub-options.
Circuit ID User-defined content of the Circuit ID sub-option.
Remote ID User-defined content of the Remote ID sub-option.
display dhcp relay server-address
Use display dhcp relay server-address to display DHCP server addresses configured on an interface
operating in DHCP relay agent mode.
Syntax
display dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator