R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

141
Verifying the configuration
# Verify that the host on the external network can access the internal Web server by using the server's
domain name. (Details not shown.)
# Display all NAT configuration and statistics.
[Router] display nat all
NAT address group information:
There are 1 NAT address groups.
Address group 1:
Address information:
Start address End address
202.38.1.3 202.38.1.3
NAT outbound information:
There are 1 NAT outbound rules.
Interface: GigabitEthernet2/1/2
ACL: 2000 Address group: 1 Port-preserved: N
NO-PAT: Y Reversible: Y
NAT internal server information:
There are 1 internal servers.
Interface: GigabitEthernet2/1/2
Protocol: 17(UDP)
Global IP/port: 202.38.1.2/53
Local IP/port: 10.110.10.3/53
NAT logging:
Log enable : Disabled
Flow-begin : Disabled
Flow-end : Disabled
Flow-active : Disabled
Port-block-assign : Disabled
Port-block-withdraw : Disabled
Alarm : Disabled
NAT mapping behavior:
Mapping mode: Address and Port-Dependent
ACL : ---
NAT ALG:
DNS : Enabled
FTP : Enabled
H323 : Enabled
ICMP-ERROR : Enabled
ILS : Enabled
MGCP : Enabled
NBT : Enabled
PPTP : Enabled
RTSP : Enabled