R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

235
Setting the DSCP value for DHCPv6 packets sent by
the DHCPv6 server
The DSCP value of a packet specifies the priority level of the packet and affects the transmission priority
of the packet.
To set the DSCP value for DHCPv6 packets sent by the DHCPv6 server:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the DSCP value for DHCPv6
packets sent by the DHCPv6
server.
ipv6 dhcp dscp dscp-value
By default, the DSCP value in DHCPv6
packets sent by the DHCPv6 server is 56.
Displaying and maintaining the DHCPv6 server
Execute display commands in any view and reset commands in user view.
Task Command
Display the DUID of the local device. display ipv6 dhcp duid
Display information about a DHCPv6
option group.
display ipv6 dhcp option-group [ option-group-number ]
Display DHCPv6 address pool information. display ipv6 dhcp pool [ pool-name ]
Display prefix pool information. display ipv6 dhcp prefix-pool [ prefix-pool-number ]
Display DHCPv6 server information on an
interface.
display ipv6 dhcp server [ interface interface-type
interface-number ]
Display information about IPv6 address
conflicts.
display ipv6 dhcp server conflict [ address ipv6-address ]
Display information about expired IPv6
addresses.
display ipv6 dhcp server expired [ address ipv6-address | pool
pool-name ]
Display information about IPv6 address
bindings.
display ipv6 dhcp server ip-in-use [ address ipv6-address | pool
pool-name ]
Display information about IPv6 prefix
bindings.
display ipv6 dhcp server pd-in-use [ pool pool-name | prefix
prefix/prefix-len ]
Display packet statistics on the DHCPv6
server.
display ipv6 dhcp server statistics [ pool pool-name ]
Clear information about IPv6 address
conflicts.
reset ipv6 dhcp server conflict [ address ipv6-address ]
Clear information about expired IPv6
address bindings.
reset ipv6 dhcp server expired [ address ipv6-address | pool
pool-name ]
Clear information about IPv6 address
bindings.
reset ipv6 dhcp server ip-in-use [ address ipv6-address | pool
pool-name ]
Clear information about IPv6 prefix
bindings.
reset ipv6 dhcp server pd-in-use [ pool pool-name | prefix
prefix/prefix-len ]