R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

323
Configuring the retry timer
The VAM server starts the retry timer after it sends a request to a client. If the server receives no response
from the client before the retry timer expires, the server resends the request. The server stops sending the
request after receiving a response from the client or after the timeout timer (product of the keepalive
interval and keepalive attempts) expires.
To configure the retry timer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter ADVPN domain view.
vam server advpn-domain
domain-name [ id domain-id ]
N/A
3. Configure the retry timer.
retry interval time-interval
By default, the retry timer is set to 5
seconds.
Configuring the VAM client
Tasks at a
g
lance
(Required.) Creating a VAM client
(Required.) Enabling VAM clients
(Required.) Specifying VAM servers
(Required.) Specifying an ADVPN domain for a VAM client
(Required.) Specifying a pre-shared key for a VAM client
(Optional.) Setting the retry timer and retry times for a VAM client
(Optional.) Setting the dumb timer for a VAM client
(Optional.) Configuring a username and password for a VAM client
Creating a VAM client
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a VAM client and enter
its view.
vam client name client-name By default, no client is created.
Enabling VAM clients
Ste
p
Command Remarks
1. Enter system view.
system-view N/A