R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

346
Figure 138 Network diagram
Table 14 Interface and IP address assignment
Device Interface IP
address Device Interface IP address
Hub 1 GE1/0/1 1.0.0.1/24 Spoke 1 GE1/0/1 1.0.0.3/24
Tunnel1 192.168.0.1/24 GE1/0/2 192.168.1.1/24
Hub 2 GE1/0/1 1.0.0.2/24 Tunnel1 192.168.0.3/24
Tunnel1 192.168.0.2/24 Spoke 2 GE1/0/1 1.0.0.4/24
AAA server 1.0.0.10/24 GE1/0/2 192.168.2.1/24
Primary server GE1/0/1 1.0.0.11/24 Tunnel1 192.168.0.4/24
Secondary server GE1/0/1 1.0.0.12/24
Configuring the primary VAM server
1. Configure IP addresses for the interfaces. (Details not shown.)
2. Configure AAA:
# Configure RADIUS scheme abc.
<PrimaryServer> system-view
[PrimaryServer] radius scheme abc
[PrimaryServer-radius-abc] primary authentication 1.0.0.10 1812
[PrimaryServer-radius-abc] primary accounting 1.0.0.10 1813
[PrimaryServer-radius-abc] key authentication simple 123
[PrimaryServer-radius-abc] key accounting simple 123
[PrimaryServer-radius-abc] user-name-format without-domain
[PrimaryServer-radius-abc] quit
[PrimaryServer] radius session-control enable
# Configure AAA methods for the ISP domain abc.
[PrimaryServer] domain abc