R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

401

402

403

404

405

406

407

408

409

410

393

# Configure OSPF to advertise the private network.

[Hub1] ospf 1

[Hub1-ospf-1] area 0

[Hub1-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.0.255

[Hub1-ospf-1-area-0.0.0.0] quit

[Hub1-ospf-1] quit

# Configure a default route.

[Hub1] ip route-static 0.0.0.0 0 10.0.0.1

4. Configure UDP-mode ADVPN tunnel interface tunnel1.

[Hub1] interface tunnel 1 mode advpn udp

[Hub1-Tunnel1] ip address 192.168.0.1 255.255.255.0

[Hub1-Tunnel1] vam client Hub1

[Hub1-Tunnel1] ospf network-type broadcast

[Hub1-Tunnel1] source gigabitethernet 1/0/1

[Hub1-Tunnel1] undo shutdown

[Hub1-Tunnel1] quit

Configuring Hub 2

1. Configure IP addresses for the interfaces. (Details not shown.)

2. Configure the VAM client:

# Create VAM client Hub2.

<Hub2> system-view

[Hub2] vam client name Hub2

# Specify ADVPN domain abc for the VAM Client.

[Hub2-vam-client-Hub2] advpn-domain abc

# Set pre-shared key 123456 for the VAM client.

[Hub2-vam-client-Hub2] pre-shared-key simple 123456

# Set the username and password to hub2.

[Hub2-vam-client-Hub2] user hub2 password simple hub2

# Specify the primary and secondary VAM servers.

[Hub2-vam-client-Hub2] server primary ip-address 1.0.0.4 port 4001

[Hub2-vam-client-Hub2] server secondary ip-address 1.0.0.4 port 4002

# Enable the VAM client.

[Hub2-vam-client-Hub2] client enable

[Hub2-vam-client-Hub2] quit

3. Configure OSPF: