R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

39
Ste
p
Command Remarks
4. (Optional.) Specify the IP address
for the backup server.
voice-config as-ip ip-address
By default, no backup
network calling processor is
specified.
5. (Optional.) Configure the voice
VLAN.
voice-config voice-vlan vlan-id
{ disable | enable }
By default, no voice VLAN is
configured.
6. (Optional.) Specify the failover IP
address and dialer string.
voice-config fail-over ip-address
dialer-string
By default, no failover IP
address or dialer string is
specified.
Customizing DHCP options
IMPORTANT:
Use caution when customizing DHCP options because the configuration might affect DHCP operation.
You can customize options for the following purposes:
• Add newly released options.
• Add options for which the vendor defines the contents, for example, Option 43.
• Add options for which the CLI does not provide a dedicated configuration command. For example,
you can use the option 4 ip-address 1.1.1.1 command to define the time server address 1.1.1.1 f o r
DHCP clients.
• Add all option values if the actual requirement exceeds the limit for a dedicated option
configuration command. For example, the dns-list command can specify up to eight DNS servers.
To specify more than eight DNS servers, you must use the option 6 command to define all DNS
servers.
To customize a DHCP option in a DHCP address pool:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter DHCP address pool
view.
dhcp server ip-pool pool-name N/A
3. Customize a DHCP option.
option code { ascii ascii-string | hex
hex-string | ip-address
ip-address&<1-8> }
By default, no DHCP option is
customized.
Table 2 Common DHCP options
Option Option name
Corresponding
command
Recommended option
command
p
arameters
3 Router Option gateway-list ip-address
6 Domain Name Server Option dns-list ip-address
15 Domain Name domain-name ascii
44
NetBIOS over TCP/IP Name
Server Option
nbns-list ip-address