R0106-HP MSR Router Series Layer 3 - IP Services Configuration Guide(V7)

Figure 17 Network diagram

Configuration procedure

1. Specify IP addresses for interfaces. (Details not shown.)

2. Configure the DHCP server:

# Enable DHCP.

<RouterA> system-view

[RouterA] dhcp enable

# Enable the DHCP server on GigabitEthernet 2/1/1 and GigabitEthernet 2/1/2.

[RouterA] interface gigabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] dhcp select server

[RouterA-GigabitEthernet2/1/1] quit

[RouterA] interface gigabitethernet 2/1/2

[RouterA-GigabitEthernet2/1/2] dhcp select server

[RouterA-GigabitEthernet2/1/2] quit

# Exclude addresses of the DNS server, WINS server, and gateways from dynamic allocation.

[RouterA] dhcp server forbidden-ip 10.1.1.2

[RouterA] dhcp server forbidden-ip 10.1.1.4

[RouterA] dhcp server forbidden-ip 10.1.1.126

[RouterA] dhcp server forbidden-ip 10.1.1.254

# Configure DHCP address pool 1 to assign IP addresses and other configuration parameters to

clients on subnet 10.1.1.0/25.

[RouterA] dhcp server ip-pool 1

[RouterA-dhcp-pool-1] network 10.1.1.0 mask 255.255.255.128

[RouterA-dhcp-pool-1] expired day 10 hour 12

[RouterA-dhcp-pool-1] domain-name aabbcc.com

[RouterA-dhcp-pool-1] dns-list 10.1.1.2

[RouterA-dhcp-pool-1] gateway-list 10.1.1.126

[RouterA-dhcp-pool-1] nbns-list 10.1.1.4

[RouterA-dhcp-pool-1] quit

# Configure DHCP address pool 2 to assign IP addresses and other configuration parameters to

clients on subnet 10.1.1.128/25.

[RouterA] dhcp server ip-pool 2

[RouterA-dhcp-pool-2] network 10.1.1.128 mask 255.255.255.128

[RouterA-dhcp-pool-2] expired day 5