R0106-HP MSR Router Series MPLS Command Reference(V7)

92
Field Descri
p
tion
Backup Bandwidth Type
Class type of the traffic on the primary tunnel that the bypass tunnel can
protect.
Backup Bandwidth Bandwidth that the bypass tunnel can protect, in kbps.
Bypass Tunnel Whether it is a bypass tunnel: Yes or No.
Auto Created Whether the bypass tunnel is automatically created: Yes or No.
Retry Limit Maximum number of tunnel setup retries.
Retry Interval Tunnel setup retry interval, in seconds.
Reoptimization Freq Tunnel reoptimization frequency, in seconds.
Backup Type
CRLSP backup mode:
• None—CRLSP backup is disabled.
• Hot Standby.
• Ordinary.
Backup LSP ID LSP ID of the backup tunnel.
Auto Bandwidth State of the automatic bandwidth adjustment function.
Auto Bandwidth Freq Automatic bandwidth adjustment interval, in seconds.
Min Bandwidth
Minimum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment.
Max Bandwidth
Maximum bandwidth (in kbps) that can be applied to the tunnel by
automatic bandwidth adjustment.
Collected Bandwidth Current output rate, in kbps.
display ospf mpls te advertisement
Use display ospf mpls te advertisement to display link and node information in an OSPF TEDB.
Syntax
display ospf [ process-id ] [ area area-id ] mpls te advertisement [ originate-router advertising-router-id
| self-originate ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process ID in the range of 1 to 65535. If you do not specify this argument,
this command displays information about all OSPF processes.
area area-id: Specifies an area by its ID, an IP address or a decimal integer, in the range of 0 to
4294967295. If you specify an integer, the system will translate the integer into the IP address format. If
you do not specify this option, this command displays information about all areas.