R0106-HP MSR Router Series MPLS Command Reference(V7)

94
Bandwidth Constraint Model: Prestandard DS-TE RDM
Bandwidth Constraints:
BC [ 0] = 0 bytes/sec
BC [ 1] = 0 bytes/sec
Local Interface Address : 197.168.1.1
Remote Interface Address : 197.168.1.11
Table 35 Command output
Field Descri
p
tion
Adv Router ID ID of the router that advertises the information.
MPLS LSR ID MPLS LSR ID of the router that advertises the information.
Flags
TE information flags:
• A—Already synchronizes the information with CSPF.
• S—Be ready to synchronize the information with CSPF.
• R—The route to the router that advertises the information is
reachable.
Router Address Count Number of Router TLV messages in TEDB.
Router Address Index Index of the current Router TLV message.
Instance ID LSA instance ID.
Link Count Number of Link TLV messages in TEDB.
Link Index Index of the current Link TLV message.
Link Type
Link types:
• Point to Point.
• Point to Multi Point.
• Broadcast.
• NBMA.
Link Flags
Link information flags:
• A—Already synchronizes the information with CSPF.
• U—Updates the information with CSPF again after the
previous update failed.
• D—Deletes the information from CSPF again after the
previous deletion failed.
Link ID Link state ID.
IGP Metric OSPF protocol metric.
Administrative Group Link attributes.
Bandwidth Constraint Model
Bandwidth constraint model, Prestandard DS-TE RDM, IETF
DS-TE RDM, or IETF DS-TE MAM.
Bandwidth Constraints This field takes effect only on DS-TEs.
BC
Bandwidth constraint value.
The Prestandard mode supports two BCs, and the IETF mode
supports four BCs.